Multisec Delivers Bespoke Offshore Lifting Beam for Enshore Subsea
Multisec has successfully designed, manufactured, tested, and supplied a bespoke offshore Multi-Point lifting beam for Enshore Subsea, supporting complex subsea cable handling operations and future offshore projects.
The project required a custom Joint Over Boarding Beam capable of managing intricate lifting arrangements while remaining adaptable for upcoming offshore campaigns. Multisec worked closely with Enshore Subsea to deliver a solution that balances structural strength, precision, and operational flexibility.
Beam specifications include:
Safe Working Load (SWL): 35 tonnes
Span: 15.5 metres
Lower lift points: 16, allowing varied load configurations
The Multi-Point Lifting beam was fully fabricated and proof load tested at the Britannia Testhouse in Middlesbrough, with certification to Eurocode, DNV-ST-0378, and BS EN 13155 standards.
In addition to the beam, we supplied a complete rigging package, including Green Pin® Tapered Pin ROV Shackles, wire ropes, polyester slings, chains, and cable grips—ensuring full compatibility and traceability from design to offshore deployment.
“Enshore approached Multisec to produce a bespoke Joint Over Boarding Beam, inclusive of all rigging arrangements. Multisec delivered on spec, on budget, and ahead of schedule,” said Henry Jemison, Package Manager at Enshore Subsea. “The beam performed flawlessly offshore and is future-ready for upcoming projects.
The beam’s first deployment was at the Inch Cape Offshore Wind Farm, located 15 km off the Angus coast in Scotland. With an installed capacity of 1.1 GW, the project will generate enough electricity to power approximately half of Scotland’s homes.
“Delivering a lifting beam that worked perfectly on its first offshore use demonstrates the value of close technical collaboration and engineering precision,” said Amanda Gardiner, Managing Director at Multisec.
This project is part of our expanding portfolio of bespoke offshore lifting solutions, designed and tested in the UK. Our company continues to support clients across renewable energy, offshore, and subsea sectors, providing engineered lifting systems, modular spreader beams, and complete rigging packages tailored to each operational challenge.
News & Events
Multisec Modular Spreader Beams achieve prestigious DNV Type Approval, confirming safety, engineering excellence, and offshore readiness for lifting projects worldwide.
Multisec Blog Multisec Modular Spreader Beam Buyer’s Guide Discover the Ultimate Lifting Solution What Is a Modular Spreader Beam? The modular spreader beams are a versatile lifting system designed to safely handle heavy and oversized loads
Across Europe, Multisec Modular Spreader Beams continue to support complex lifting operations — from offshore projects to urban infrastructure.
Multisec News Multisec Delivers Bespoke Multi-Point Spreader Beam to the USA Multisec has once again demonstrated its expertise in engineered lifting solutions with the completion and shipment of a custom 34-tonne Multi-Point Spreader Beam to the
Durham Lifting and Multisec Engineered Lifting Systems proudly welcomed guests to a special ribbon-cutting ceremony to mark the official launch of the world’s largest C-Hook, designed and built for SeAH Wind.
Multisec News Multisec Engineered Lifting Systems at RenewableUK Global Offshore Wind 2025 We are thrilled to announce that we will be exhibiting at RenewableUK’s Global Offshore Wind event, taking place on 17–18 June 2025 at ExCeL
We’re proud to see another bespoke Multisec Tubular Spreader Beam heading out — this time a 25-tonne system bound for a vessel in Italy.
We are thrilled to announce the addition of the Multisec Multi-Point 34T Heavy Lifting Beam to our hire fleet!
Multisec News Multisec Delivers First-Ever 30-Meter Modular Lifting Frame for Scour Protection Installation Multisec has reached a new milestone in heavy lifting solutions through a recent collaboration with Pipeshield International, showcasing our expertise in modular lifting
Our trusted distributor, HLR - Heavy Lift Rental, recently played a key role in a vital flood protection project by supplying a Multisec Modular Spreader Beam.
A Triumph in Timber Engineering The Oak Glulam Dome Installation at Oxford University In a remarkable display of architectural innovation and engineering prowess, a stunning project at Oxford University has recently completed, culminating in the breath-taking
Mercia Lifting Gear LTD Announce Strategic Global Partnership Multisec is proud to announce a new strategic global partnership with Mercia Lifting Gear LTD. The partnership will see Mercia Lifting Gear become a distributor of Multisec Spreader
Multisec News New Collaboration with HLR – Heavy Lift Rental We are thrilled to announce our new collaboration with HLR – Heavy Lift Rental, who will be an official distributor for Multi-Sec Modular Spreader Beam systems in
