Modular Spreader Beams
DNV Type Approved modular spreader beam systems from 13 to 250 tonnes for configurable spans and controlled load distribution.
Explore Spreader Beams →UK Heavy Lifting Equipment Manufacturer
Heavy Lifting Equipment
Multisec designs and manufactures heavy lifting equipment in Middlesbrough, UK, including modular spreader beams, lifting beams, modular lifting frames and bespoke engineered systems for complex loads and demanding projects.
UK ManufacturedDNV Type Approved Beam RangeProof Testing AvailableStandard & Bespoke
View Product RangeRequest A QuoteEngineered Lifting Systems
Equipment Built Around The Lift
Heavy lifting equipment should be selected around the load, not just a headline capacity. Multisec combines standard modular systems with project-specific engineering so lifting teams can choose the right route for span, lifting points, headroom, centre of gravity, rigging geometry and operating environment.
The core range covers configurable below-the-hook systems for repeatable lifting requirements, while bespoke engineering supports capacities, geometries and project conditions outside the standard ranges.
Product Range
Heavy Lifting Equipment From One UK Manufacturer
Choose a standard Multisec system where the approved range suits the lift, or move into bespoke engineering when the application falls outside standard capacity, geometry or certification requirements.
Modular Lifting Frames
MULTI-F four-point lifting frames for loads that require controlled support in two directions and configurable frame geometry.
Explore Lifting Frames →Lifting Beams
Multi-Point lifting beams from 13 to 300 tonnes for restricted headroom, multiple lower pick points and complex load geometry.
Explore Lifting Beams →Adjustable H-Frames
Adjustable lifting frames for changing lifting centres, modular units and four-point lifting applications with site constraints.
Explore H-Frames →
Standard Or Bespoke
When A Standard System Is Not Enough
Heavy lifts can introduce requirements that no catalogue system should be forced to accommodate. Higher capacity, unusual centres of gravity, non-standard lifting points, tandem crane arrangements, restricted headroom or project-specific interfaces can all move the requirement into bespoke engineering.
Multisec can design and manufacture bespoke lifting and spreader beams, adjustable frames, specialist rigging plates and project-specific support equipment around the actual lift.
Engineering ReviewLoad, geometry, rigging and project constraints considered before design.
UK ManufactureEquipment manufactured with direct engineering and project support.
Proof TestingTesting can be completed at Britannia Testhouse where required.
DocumentationProject documentation and certification supplied to the applicable requirement.
Why Multisec
Heavy Lifting Equipment With Engineering Behind It
Multisec equipment supports offshore, renewables, marine, infrastructure, manufacturing and heavy engineering projects where controlled load handling, traceability and technical support matter.
Certifications & ComplianceDNV Type ApprovedMulti-13 to Multi-250 modular spreader beams are covered by DNV Type Approval to DNV-ST-0378.
UK EngineeringStandard and bespoke lifting systems are developed and manufactured from Middlesbrough.
Project SupportSelection, engineering, testing and documentation can be coordinated around the lifting requirement.
Real Project EvidenceMultisec systems support offshore wind, marine, infrastructure and high-capacity heavy-lift applications.
Industries
Engineered For Demanding Lifting Environments
Offshore Wind
DNV Type Approved modular beams and bespoke systems for monopiles, transition pieces, turbine components and installation projects.
Offshore Wind Equipment →Marine & Ports
Spreader beams, lifting beams and frames for project cargo, vessel operations, load-out and specialist port handling.
Marine & Port Equipment →Heavy Engineering
Engineered equipment for machinery, large fabrications, structural assemblies and loads with multiple or uneven lifting points.
Heavy Engineering Equipment →Buyer Questions
Heavy Lifting Equipment FAQs
Who manufactures heavy lifting equipment in the UK?
Multisec designs and manufactures heavy lifting equipment in Middlesbrough, UK. The range includes modular spreader beams, modular lifting frames, Multi-Point lifting beams and adjustable H-Frames, with bespoke engineered lifting equipment available for non-standard projects.
What types of heavy lifting equipment does Multisec manufacture?
Multisec manufactures modular spreader beams, modular spreader frames, Multi-Point lifting beams and adjustable H-Frames, alongside bespoke lifting beams, spreader beams, specialist rigging plates and other project-specific lifting solutions.
Does Multisec manufacture DNV Type Approved lifting equipment?
Yes. The Multi-13 to Multi-250 modular spreader beam range holds DNV Type Approval to DNV-ST-0378. Bespoke equipment follows the certification and verification route required by the individual project.
Can Multisec design lifting equipment for a non-standard load?
Yes. Bespoke equipment can be developed around load weight, dimensions, centre of gravity, lifting points, headroom, crane arrangement, site conditions and project-specific documentation requirements.
What information should I send for a heavy lifting equipment quotation?
Send the required WLL or load weight, dimensions, lifting-point locations, span or lifting centres, available headroom, centre of gravity, crane and rigging arrangement, project date and any drawings or lift plans available.
Project Enquiry
Tell Us About The Lift
Whether the requirement fits a standard Multisec system or needs bespoke engineering, send the load, geometry and project information and the team can review the appropriate equipment route.
Start A Project Quote