Understand the lift
Load weight, centre of gravity, lifting points, span, headroom, crane arrangement, site conditions and project constraints.
MULTISEC ENGINEERING CAPABILITY
FROM STANDARD SYSTEMS
FROM STANDARD SYSTEMS
TO 2,000 TONNE
BESPOKE HEAVY LIFT
Multisec designs and manufactures engineered lifting systems in Middlesbrough, UK. From DNV Type Approved modular equipment to project-specific heavy-lift systems, each solution is developed around the load, lifting geometry, operating environment and applicable certification requirements.
PUBLISHED PROJECT EVIDENCE
CAPABILITY YOU CAN POINT TO.
Multisec capability is evidenced by delivered equipment, certified projects and standard product ranges rather than unsupported maximum-capacity claims.
FROM REQUIREMENT TO DELIVERY
ENGINEERING BEHIND THE LIFT.
A lifting system is selected or developed around the actual project. The route changes with the load, geometry, lifting points, headroom, environment and certification requirements.
Engineering & analysis
Design review, calculations and project-specific engineering appropriate to the lifting arrangement and applicable requirements.
UK manufacture
Standard and bespoke Multisec systems are manufactured in Middlesbrough with controlled fabrication and material traceability.
Testing
Proof load testing can be completed at Britannia Testhouse where required by the product or project route.
Certification
DNV Type Approval applies to the Multi-13 to Multi-250 modular range. Bespoke equipment follows the certification route required by the project.
Project delivery
Technical documentation, certification and engineering support are coordinated around the equipment being supplied and the requirements of the lift.
PRODUCT RANGE
Choose the right Multisec lifting system
A proven range of modular and configurable lifting systems for controlled, repeatable and safety-critical lifting operations.
01MODULAR SPREADER BEAMS
Modular Spreader Beams
DNV Type Approved modular spreader beams for flexible, certified lifting configurations.
View Product Range →
02FOUR-POINT LIFTING
Modular Spreader Frames
Configurable spreader frames for stable four-point lifting where beam arrangements are unsuitable.
View Product Range →
03MULTI-LUG LIFTING
Multi-Point Lifting Beams
Multi-lug lifting beams for controlled load distribution across multiple attachment points.
View Product Range →
04LOW-HEADROOM LIFTING
Adjustable H-Frames
Adjustable H-Frames for four-point lifting applications where headroom and site access are limited.
View Product Range →PROJECT-SPECIFIC ENGINEERINGNeed something outside the standard range?
VIEW CUSTOM SOLUTIONS →
Custom lifting and spreader beams, lifting frames, Tri-Plates, support equipment and engineered solutions developed around the actual lift.
FLAGSHIP PROJECT EVIDENCE
WHAT “HEAVY LIFT” MEANS AT MULTISEC.
These are real delivered projects, not theoretical maximums. The photographs below show the scale of the work behind the numbers.
1,200t & 2,000t Bespoke Spreader Beams
Two high-capacity project beams at 12.5m and 18.5m spans, designed, manufactured, proof load tested and DNV Product Certified.
READ PROJECT →1,600t / 32m Monopile Beam
A 1,600 tonne WLL beam with 32 metre lifting centres, delivered for major offshore-wind monopile handling requirements.
READ PROJECT →SeAH Wind Bespoke C-Hook
One of the world’s largest C-Hooks, engineered to handle monopile sections up to 125 tonnes, 15.5m diameter and 4.2m length.
READ PROJECT →Enshore 16-Point Offshore Beam
A 35 tonne, 15.5m beam with sixteen lower lifting points, supplied with a complete rigging package for subsea cable handling.
READ PROJECT →ASSURANCE & DOCUMENTATION
ENGINEERING CAPABILITY BACKED BY EVIDENCE.
Multisec separates standard product approvals from project-specific certification so customers can see exactly what is approved, tested and documented for the equipment being supplied.
VIEW CERTIFICATIONS & COMPLIANCE →- DNV Type ApprovalMulti-13 to Multi-250 modular spreader beam range.
- Project certificationBespoke systems follow the applicable project route, including DNV Product Certification where required.
- TestingProof load testing available to the applicable product or project requirements.
- DocumentationCertification, technical documentation and traceability supplied to the appropriate scope.
COMMON QUESTIONS
ENGINEERING CAPABILITY FAQS
What lifting equipment does Multisec engineer and manufacture?
Multisec designs and manufactures standard and bespoke lifting systems including modular spreader beams, modular spreader frames, Multi-Point lifting beams, adjustable H-Frames, bespoke lifting and spreader beams, Tri-Plates and project-specific lifting equipment.
What is the largest lifting capacity Multisec has delivered?
Multisec has delivered a bespoke 2,000 tonne Working Load Limit spreader beam with an 18.5 metre span, designed, manufactured, proof load tested and DNV Product Certified for the project.
Does Multisec manufacture lifting equipment in the UK?
Yes. Multisec lifting systems are engineered and manufactured in Middlesbrough, United Kingdom, with project support covering standard products and bespoke lifting requirements.
Are Multisec spreader beams DNV Type Approved?
The Multi-13 to Multi-250 modular spreader beam range holds DNV Type Approval to DNV-ST-0378. Bespoke equipment follows the certification route required by the individual project and can include DNV Product Certification where applicable.
Can Multisec support proof load testing and project documentation?
Yes. Testing, certification and supporting technical documentation can be supplied to the applicable product or project requirements. Major bespoke Multisec lifting systems have been proof load tested at Britannia Testhouse before delivery.
Who handles hire of Multisec lifting equipment?
Hire enquiries for suitable Multisec equipment are handled separately through Durham Lifting. Multisec customer-facing product and engineering pages focus on purchase, technical selection and bespoke project requirements.
PROJECT ENQUIRY
GIVE US THE LIFT.
Send the load, span, lifting points, centre of gravity, headroom, operating environment and any available drawings. The Multisec team can identify whether the right route is a standard system or project-specific engineering.